Rapid Quote

Comments or questions are welcome.

* indicates required field

ENGINE AND ELECTRICAL
HIGH IDLE CONTROL: Electronic high idle control operating in park to raise alternator output to meet electrical demand.


POWER POINTS: 12 volt power points, cigarette lighter style outlet mounted in the following locations and wired to constant power for command lights, portable lighting and other optional equipment integrated into the custom harness system.



EXTERIOR
LETTERING & GRAPHICS: Would you like a custom graphics package designed for you? First Priority offers a full array of custom cut 3M reflective material and vinyl graphics with our in house printing / cutting equipment


PROTECT THE FRONT OF YOUR VEHICLE:



INTERIOR AND CABINETRY
CONSOLE: Please select an equipment console to be mounted between the front driver and passenger seat that will hold your emergency lighting controls, radios, siren, etc.



INTERIOR LIGHTING: Light up your rear command and work areas of the vehicle.



CABINETRY: First Priority Cabinet Systems are fabricated from special MDO plywood and covered with high pressure counter grade Formica style laminate, marine grade carpet or special chemical resistant continuous sheet materials. For added durability edges are trimmed with thick PVC bumper strip installed into a machine slotted edge, drawer faces and doors are built with unbreakable black HDP composite and First Priority uses the highest quality hardware in the industry making First Priority cabinet systems transferable from vehicle to vehicle for many years to come. Dividers are removable. Drawers and include adjustable emergency vehicle compression style latches, swing open and sliding doors are available and all drawers utilize full extension drawer slides. A detailed set of three dimensional computer generated plans will be submitted for approval after a contract is issued and prior to construction.


EMERGENCY LIGHTING AND EQUIPMENT ROOF LIGHTING
FRONT LIGHT BAR: Please choose one of the roof mounted light bar styles listed below. A more detailed light bar plan will be created and submitted for your approval at a later time.




TRAFFIC ARROW CONTROLLER: Please choose a rear traffic arrow controller style.





FRONT LIGHTING
FORWARD FACING LED INSERTS: LED inserts, installed in the front headlight and driving light OEM modules. (Some headlight assemblies do not allow internal mounting, therefore the light will be located in close proximity to the headlight, surface mounted with flange).


GRILL LIGHTS: LED lighting mounted in the grille area




SIDE AND REAR LIGHTING
TAIL LIGHT LED FLASHERS: Two (2) LED inserts, one in each red section of each tail light, color red.


BEHIND GLASS LIGHTING, rear hatch: One (1) double LED unit mounted to the top of the hatch at the rear window. Light will move with the hatch to not blind the operator when approaching the rear cabinetry.



REAR HATCH SAFETY FLASHERS: Two (2) LED inserts mounted in the bottom part of the cargo hatch so that when the hatch is opened, these lights will flash rearward to notify on coming vehicles. When the cargo hatch is closed these lights are not visible. Lights shall be activated when the hatch opens and the flasher circuit is activated.



SIREN AND WARNING SYSTEMS
SIREN & LIGHT CONTROLLER: A siren and light controller with three position selector switch and independent switches for other lighting functions will be installed in the front console.




COMMUNICATION EQUIPMENT





Acceptable file types: doc,docx,pdf,txt,gif,jpg,jpeg,png.
Maximum file size: 4mb.

Quick Contact

Your Name:*
Phone:
-
E-mail:*
Which topic best describes your question?
Subject:*

Message:*
Type the characters you see here: